Build in a Residential Flagpole

When decide on a residential flagpole, first determine on the position and desired height. Make sure you can observe the flag from numerous angles. Is it so high that you have to crane your neck to see it? Is it so low that it is mask behind a shrubbery? Choose something in in the middle.

Next, decide on your flagpole material. The most attractive material for residential flagpoles is aluminum, for its high strength, low preservation, low weight, and low cost. Fiberglass is the second most attractive material, due to it boasts a hard glossy gel coat finish that resist most soiling and scratching.

Now make choice either an external or internal halyard system. A halyard structure is the means by which the flag is raised and lowered. It consists of a rope or cable threaded through a truck or pulley structure at the top. External halyard scheme are rigged on the outside of the pole, locked in place by wrapping the rope or cable around a simple cleat at the base of the pole. Internal halyard setup are located on the inside of the pole, with a slot at the base for a special winch or handle. In areas where vandalism is a concern, decide on an internal halyard system.

Finally, choose what color you want your pole to be, and whether you want to add custom ornaments, such as a finial or ball, eagle, or any other type of ornament.

When it comes time to position the flag itself, dig a hole. The diameter of the hole lean on on the size of the flagpole. Wet down the hole and then fill it with concrete. Place a steel groundsleeve into which the flag will be set. Be sure that 10 % of the pole length is underground, and that the pole doesn't contact the concrete, as concrete corrodes most flag materials. If you have any questions, ask advice of the fabricator before proceeding. In many cases, the fabricator can install the flag for you.

See additional information on flagpoles and flapoles kits